joint process
英 [dʒɔɪnt ˈprəʊses]
美 [dʒɔɪnt ˈprɑːses]
网络 关联工作事务流程; 联合工艺; 整合制程
双语例句
- Next screening tests are carried out to select materials for use in the joint design process.
进一步的筛选测试将会进行来选择粘合设计过程中所用的材料。 - Reported OPV3 coverage nationwide was87% in2008, the last year for which complete data are available under the WHO/ UNICEF joint reporting process.
据报该国2008年（按照世卫组织/联合国儿童基金会联合报告程序备有完整数据的最后一年）OPV3覆盖率为87%。 - The mould net resolved anti-corrosion problems occurred in hinge joint process and reduced the need for reinforcement during construction work, and improved evenness of mould net.
该模网解决了现有铰接连接件易防腐蚀问题，减少了施工过程中需要配筋的工作，并且改善了模网的平整度。 - Research on Desulfurization and Deashing for Medium-high Sulphur Coal with Joint Process of Shaking Table and Flotation
中高硫煤摇床&浮选联合法脱硫降灰试验研究 - Ag-cu-ti braze alloy used for si_3n_4-steel jointing and joint process
Si3N4－钢铁钎接用银－铜－钛钎料及其钎接工艺 - It analyzed some key methods of substation bus wire joint through adopting hydraulic compression-fitting joint process and put forward some opinions of using material substitute and mechanical equipment and high altitude working of this kind of process.
对采用液压压接工艺后变电站软母线压接工作中的要点进行分析，对材料代用、使用的机械及由此工艺带来的高处作业增加等提出了一些看法和体会。 - Treating Micro-polluted Yellow River Water with Joint Process of Ozone Preoxidation-direct Filtration and Biological Active Filter
O3预氧化&生物活性滤池直接过滤工艺处理黄河微污染原水 - The circumferential square butt joint of small-diameter(≤φ 3mm) stainless steel tubes is difficult to be welded in technique and that is, a smooth joint process of small-diameter tubes. which is widely applied in industry.
细直径（≤φmm）不锈钢管平口环对接接头，是技术难度较大的焊接接头，也是工业应用越来越多的一种细径管平滑连接方法。 - Otherwise, the theories of choosing materials and joint process have been put forward to improve the quality of joint.
对炉盖制作材料的选择条件和焊接工艺作了说明和改进，以提高焊接的质量。 - Based on the result of analog calculation, the main logistics parameters and the operating conditions of main equipments for the joint process were proposed, which provided a new train of thought for rectification of large scale ammonia synthesizing plants.
根据模拟计算结果，提出了氨醇联产工艺主要物流参数和主要工艺设备的操作条件，为大型合成氨装置改造提供了一种新的思路。 - It is developed that a new hyperstable adaptive algorithm which can be used in the multichannel IIR configuration and/ or the high-order IIR configuration for joint process estimation.
本文提出了一种可供在多路IIR或者高阶IIR情况下进行联合过程估值的超稳定自适应算法。 - The joint process had a higher profit reliability and stronger anti-risk ability, and it was deserving of carrying out in generalization.
联合生产工艺的盈利可靠性高，抗风险能力强，值得推广应用。 - Study on the Relationships between Solder Joint Process Parameters and Reliability of Plastic Ball Grid Array Component Based on the Orthogonal Experiment Design
基于正交试验设计的塑封球栅阵列器件焊点工艺参数与可靠性关系研究 - Ultrasonic riveted joint process possess the characteristics of operating simple, low costing, high efficiency, suitable for great batch industrial producing.
与传统的粘接、机械连接等塑料件装配连接工艺相比，超声波铆接工艺操作简单、生产成本低、效率高，适于大批量工业化生产。 - Recombining process of paper and plastic with water-based cold assembly adhesive The Gluing Joint Process of Aluminium-plastic Composition Sheet in Normal Temperature
水基纸塑冷贴胶复合工艺铝一塑复合板冷贴工艺研究 - The orthogonal experiment design method was applied to study the relationships between solder joint process parameters and reliability of plastic ball grid array ( PBGA) component.
基于正交试验设计法对塑封球栅阵列（PBGA）器件焊点工艺参数与可靠性关系进行了研究。 - Application of plastic parts ultrasonic riveted joint assembly process
塑料零件超声波铆接装配工艺及应用 - Optimization of Pipe-board Joint Process for Large-scale Heat Exchanger
大型换热器管与管板连接工艺的优化 - Study on Advanced Treatment of Drinking Water with Joint Process of Ozone Catalytic-Activated Carbon-Filtration
过氧化氢催化臭氧氧化-活性炭-砂滤联用深度处理微污染水 - Analysis on the Failure in the Gluing Joint Process
粘接工艺失效分析 - The processing technology and key control points; the joint fermentation process;
生产工艺及关键控制点：共同发酵法； - By using the interactive navigation mode, the PQR matching and joint process solution was realized.
通过交互导航方式实现PQR匹配及其相应的接头工艺求解； - The Gluing Joint Process of Aluminium-plastic Composition Sheet in Normal Temperature
铝一塑复合板冷贴工艺研究 - By taking the two electricity generation techniques as the centre of development, the entire process of converting coal into electricity will be optimized and integrated, leading to the realistic joint process of converting coal into electricity and the comprehensive utilization of the solid wastes.
以这两种发电方式为核心，对整个煤电转化过程进行优化与集成，提出符合我国实际的煤电转化过程路线，并提出优化集成的煤电转化过程及煤系主要产物循环利用途径。 - And profited from the Dong 'an Mitsubishi engine success development experience the question which should pay attention to the motor car engine enterprise joint capital initial period and in the joint capital process to put forward the guidance proposal.
并借鉴东安三菱发动机的成功发展经验对汽车发动机企业合资初期和合资过程中应该注意的问题提出了指导性建议。 - Based on the process mineralogy results, a joint process by magnetic and flotation technology was developed to improve the grade of iron and reduce sulfur content of the concentrate.
以此为基础，论文试验采用磁-浮联合流程，提高铁的品位，降低硫的含量。 - In this paper, we applied the joint process of moving bed biofilm reactor ( MBBR) and A/ O for wastewater treatment, enhancing the nitrogen removal technology.
本文采用移动床生物膜反应器（movingbedbiofilmreactor，MBBR）与A/O的联合工艺进行废水处理，强化脱氮技术。 - The threaded joint assembly is a key technology and important process in automobile assembly manufacturing. Flexible assembly system of threaded joint is the main way to realize the complex threaded joint assembly process, improve assembly efficiency and ensure the quality of assembly.
螺纹联接的装配是汽车装配制造中的关键技术和重要工艺之一，螺纹联接柔性装配系统是实现复杂的螺纹联接装配工艺、提高装配效率和保证装配质量的主要方式。